Safety & Standards
Side-Rail Entrapment Zones & Split-Rail Geometry
Key Engineering & Procurement Parameters
| Parameter | Factory & Industry Benchmark |
|---|---|
| Max Gap Between Rails | Less than 120 mm (entrapment Zone 1–4 control) |
| Min Rail Height Above Foam | At least 220 mm above compressed mattress top |
| Common Rail Types | 4-section tuck-away ABS split rails / collapsible aluminum rails |
| Mattress Thickness Matching | 100–150 mm standard foam or alternating-pressure overlay |
Buyer & Tender Q&A
How does mattress thickness affect side-rail safety?
An overly thick mattress (e.g., 200 mm air overlay on a standard rail) reduces effective rail height below 220 mm, increasing roll-over risk. Always pair rail height with mattress thickness.
Why do hospitals prefer 4-section split ABS rails over full-length rails?
Split rails allow the lower section to fold down for safe patient egress while keeping the upper rail raised as a grip handle, avoiding full restraint.
Need This Specification in Your Tender or Container Plan?
Explore matching factory-direct HJIM models or request a clause-by-clause engineering datasheet.